NOTE :

Salam readers,

Momoy dah move to belog baru. Belog ini ada problem. Sila ke belog baru Momoy di http://www.momoy-blogirl.blogspot.com

Thanks all.

Saturday, July 23, 2011

Kerja Kosong | JOB Vacancy Abu Dhabi Oil Refining Company





Assalamualaikum kawan-kawan.


Email kerja kosong ni Momoy terima dari kawan. Dia sedang mencari siapa-siapa yang berminat dan berkelayakan untuk mengisi kerja kosong dalam bidang oil and gas, boleh submit resume dan application letter pada Momoy. Email Momoy di syalyx_00@yahoo.com untuk Momoy forward.






  Process Department Manager
Minimum Requirements
• B.Sc. in Chemical Engineering, Mechanical Engineering or equivalent
12 years of diversified experience in Refinery / Gas processing operations, 
of which 6 years should have been in the managerial level


Safety Environment & Fire Department Manager
Minimum Requirements:
• B.Sc. degree in Science, Chemical Engineering or equivalent.
• 12 years experience in various aspects of safety, environment, fire and 
security, preferably in an oil refinery or petrochemical plant, of which 
at least 6 years should have been in a supervisory position.


Utilities Manager- 
Minimum Requirements
• B.Sc. in Chemical Engineering, Mechanical Engineering or equivalent.
• 12 Years of diversified experience in Refinery/Gas processing operations, 
of which 6 years should have been in a senior supervisory level.


Maintenance Section Head-
Minimum Requirements:
• B.Sc. in Mechanical Engineering
• 9 Years experience in the installation, maintenance and repair of a 
wide range of heavy rotating and stationary equipment; and their 
control/ electrical systems preferably in a power/desalination 
plant or in oil/gas or petrochemical industry including 4 years in 
a senior supervisory position.


Utilities Section Head
Minimum Requirements
• B.Sc. in Chemical or Mechanical Engineering or ?equivalent.
• 9 years experience in Refinery Plant Operations, including 4 years 
in a senior supervisory level.


Gas Processing & Treating Section Head
Minimum Requirements
• B.Sc. in Chemical Engineering or equivalent.
• 9 Years of diversified experience in Refinery/Gas processing operations, 
of which 4 years should have been in a senior supervisory level at 
Gas sweetening and treating, Hydrogen plants
• Candidates must have full knowledge of DCS operations and 
refinery diversified equipments (static & rotating) especially cryogenic 
equipments
• Must have leadership skills and planning skills to work in multiple shifts
• Must have good computer skills- MS Office, Maximo etc.


Base Oil Section Head
Minimum Requirements
• B.Sc. in Chemical Engineering or equivalent.
• 9 years experience in Refinery / Gas processing plant operations of 
which 4 years should have been in a senior supervisory level at 
Hydrocraker / Lube Oil Plants
• Candidate must have complete knowledge of DCS operations and 
refinery diversified equipments (static & rotating) especially high pressure 
equipments
• Candidates must have full knowledge of DCS operations and 
refinery diversified equipments (static & rotating) especially cryogenic 
equipments
• Must have leadership skills and planning skills to work in multiple shifts
• Must have good computer skills- MS Office, Maximo etc.


Olefins & Alkylates Section Head
Minimum Requirements
• B.Sc. in Chemical Engineering or equivalent
• 9 years of diversified experience in refinery/ gas processing operations, 
of which 4 years should have been in senior supervisory level at 
Olefins Conversion and Alkylation plants
• Candidates must have full knowledge of DCS operations and 
refinery diversified equipments (static & rotating) especially cryogenic 
equipments
• Must have leadership skills and planning skills to work in multiple shifts
Must have good computer skills- MS Office, Maximo etc.


Oil Movement Section Head
Minimum Requirements
• B.Sc. in Chemical or Mechanical Engineering or ?equivalent.
• 9 years experience in oil movements Terminal operations, 4 years of 
which should have been in a senior supervisory level.


Green Diesel Plant Section Head
Minimum Requirements
• B.Sc. in Chemical Engineering or equivalent.
• 9 years experience in Refinery / Gas processing plant operations of 
which 4 years should have been in a senior supervisory level


Control Maintenance Section Head
Minimum Requirements
• B.Sc. in Instrumentation or Electronic Engineering
• 9 years experience in the installation, maintenance, and repair 
of wide range of instrumentation and associated control systems, 
in an oil/gas or petrochemical industry including 4 years in a senior
 supervisory position


Plant Electrical Maintenance Section Head
Minimum Requirements
• B.Sc. in Mechanical Engineering
• 9 years experience in the installation, maintenance and repair of a 
wide range of Power Generators, Electrical equipments & associated 
control panel preferably in Oil & Gas or petrochemical industry including 
4 years in a senior supervisory role


Sr Operations Engineer—BeAAT Plant
Minimum Requirements:
• BSc in Chemical Engineering or equivalent.
• At least 7 years experience in operation as Shift Engineer/ Supervisory 
level in any power or process plant.
• Should have experience in operation of power or process plant especially 
in utility systems.
• Operation and working knowledge in Waste Treatment Plant
• Good knowledge of English and Computer Literate


Sr Process Safety Engineer
Minimum Requirements:
• B.Sc Chemical Engineering, Professional level in HSE, i.e. CSP or 
fellowship from IOSH is an advantage.
• Minimum 7 years of relevant experience
• Experience related to HSE with deep focus on process safety in 
Oil, Gas or Petrochemical Companies. Some initial 02 years experience in 
process operation or process engineering is a definite plus.
• Ability to act as an advisor and capable to interact with senior staff 
from operation and other refinery departments.
• A highly motivated team player with effective communication and 
interpersonal skills. Fluency in English (both oral and written) is compulsory.
• U.A.E driving license is preferred.


Sr Operations Engineer—BeAAT Plant
Basic Functions :
• Bsc. in Mechanical/Electrical/Chemical Engineering or equivalent
• At least 5 years experience in operation as Shift Engineer/ Supervisory 
level in any power or process plant
• Should have experience in operation of power or process plant especially 
in utility systems.


Sr Performance Monitoring Engineer
Minimum Requirements
• B.Sc in Chemical or Petroleum Processing Engineering
• 9+ years of experience in production planning and scheduling 
including working with computer based industrial engineering 
applications (ie Linear Programming) preferably in an Oil / Gas petrochemical 
industry


Sr Process Engineer- Technical Services
Minimum Requirements
• Graduate course (B.Sc. / B.E.) in Chemical Engineering or 
Petroleum Processing Engineering.
• 7 Years experience in process and utilities of Refineries, Petrochemical 
or Gas plant in Process engineering discipline.
• Proficiency in English language and expertise in technical report writing.
• Proficient user of relevant Computer applications and software.


Sr Reliability Engineer
Minimum Requirements
• B. Sc. in Mechanical Engineering or equivalent.
• 12 + years experience and specialized knowledge in statistical analysis, 
preventive and predictive maintenance, shutdown and major turnaround
 maintenance planning and costing activities preferably in refinery or 
petrochemical industry.
• In depth knowledge and use of CMMMS (Computerized Maintenance Material 
Management) systems (Maximo Preferred).
• Familiarity with RCM (Reliability Centered Maintenance) Techniques.
• Good interpersonal and communication skills.


Sr Industrial Hygienist
Minimum Requirements
• Bachelor Degree in Chemical Engineering or Certified Industrial Hygienist 
or other science degree
• Specialised qualification and training e.g Diploma in Industrial Hygiene 
or Occupational Hygiene
• 10 years experience in Industrial Hygiene in a Refinery or Petrochemical 
Industry


Sr Process Improvement Engineer
Minimum Requirements
• Bachelor Degree in Chemical Engineering
• At Least 12 years of experience in Oil & Gas industry with maximum 
experience in Refinery.
• Relevant working experience of at least 10 years in modern conversion 
refineries
• Good knowledge of various refinery process units, available technologies
 and possible integration options with petrochemical complex.
• Hands on experience of utilizing refinery PIMS LP models.
• Ability to calculate Refinery Feed and products costs
• Effective Analytical & Communication Skills
• Fully conversant with economics calculations like GRM, IRR, NPV etc.
• Experience in process development strategy, plant & project economics
• Sound knowledge and good experience in running Linear Programming (LP) 
Tools.


Catalyst Research Leader
Minimum Requirements
• Ph.D in Chemical Engineering with 5+ years experience in R&D capacity
• [OR]
• M.Sc. in Chemical Engineering with 10+ years experience in R&D capacity
• [OR]
• B.Sc. in Chemical Engineering with 15+ years experience in R&D capacity


Sr Process Engineer
Minimum Requirements
• B.Sc. degree in Chemical Engineering.
• 8 years of experience in Process and Utilities of refineries, petrochemical 
or gas plant as process engineer.
• Good knowledge of chemical engineering simulation software.
• Good knowledge of English both written and spoken.


Sr Control Engineer
Minimum Requirements
• BSc in Instrumentation or Electronics engineering.
• 7 years experience in the installation, maintenance and troubleshooting of 
a wide range of instrumentation and microprocessor based advanced control 
systems in an oil/gas, petrochemical industry and/or power generation plant.


Sr Operations Engineer
Minimum Requirements
• B.Sc. in chemical Engineering or Equivalent.
• 7 years experience in oil refining or gas processing operations.


Sr Corrosion Engineer
Minimum Requirements:
• B.Sc in Metallurgical, Mechanical or Chemical engineering.
• 7 years experience in process and utilities of Petroleum refineries, 
Chemical Process plants, and Petrochemical plants of which 4 years as 
specialist in Corrosion Engineering.


Marine Co-ordinator
Minimum Requirements
• Master Marine Certificate or equivalent B.Sc. degree.
• 6 years experience in Marine coordination, including working with computer 
based marine information systems.
• Good knowledge of English.


Sr Pilot Engineer
Minimum Requirements
• BSC in Chemical or Petroleum Processing Engineering
• Total of 12 plus years of experience out of which 5 years experience
 in process / operations with sound proven knowledge on pilot plant 
operations


NDT Engineer
Minimum Requirements
• Bachelors Degree in Mechanical Engineering with Level III 
qualification in NDT examinations or equivalent preferred.
• 5 years experience in Inspection and NDT testing of which at least 
4 years should be in Petroleum Process plant.
• Process Plant Degradation Experience with API 571 knowledge.
• Knowledge in Advance NDT Techniques (ECT-(Eddy Current Testing), 
Thermography, Acoustic emission, and Radiography.


Corrosion Engineer
Minimum Requirements
• B. Sc. in Metallurgical, Mechanical or Chemical Engineering preferably 
with qualification in corrosion engineering.
• 5 Years experience in process and utilities of Petroleum Refineries,
• Good knowledge of written and spoken English.


Automation Engineer- (ABB)
Minimum Requirements
• B.Sc. in Chemical or Electronics engineering.
• 7+ years experience in computer systems design and implementation in 
an oil / gas or petrochemical industry.
• Candidate should have experience in ABB Systems
• Experience in ABB 800XA Control System, Process Portal B, Infi 90
• Good knowledge of English.


Automation Engineer- (Foxboro)
Salary in Dhs. 18430/- to 22534/- (including allowance)
Minimum Requirements
• B.Sc. in Chemical or Electronics engineering.
• 7+ years experience in computer systems design and implementation in 
an oil / gas or petrochemical industry.
• Candidate should have experience in Foxboro Systems
• Good knowledge of English.


Automation Engineer- (Yokogawa)
Minimum Requirements
• B.Sc. in Chemical or Electronics engineering.
• 7+ years experience in computer systems design and implementation in 
an oil / gas or petrochemical industry.
• Candidate should have experience in Yokogawa


Corrosion / Cathodic Protection Engineer
Minimum Requirements
• B.E / B. Tech degree in Electrical Engineering or NACE CP specialist.
• Minimum 5 years experience in operation and maintenance of Cathodic 
Protection System in a petroleum /chemical plant.
• Good knowledge of English.


Safety Engineer
Minimum Requirements
• B.Sc. in Science, Chemical Engineering..
• 7+ years experience in safety matters, preferably in an Refinery or 
petrochemical plant.
• UAE Valid driving license in preferable.
• Good knowledge of English.


Mechanical Engineer
Minimum Requirements
• B. Sc. in Mechanical Engineering or equivalent.
• 5 Years experience in the installation, commissioning, maintenance and 
repair of major rotating and mechanical equipment in an 
oil/gas/petrochemical or Power Plants.
• Good knowledge of English.


Process Engineer- (Technical Services)
Minimum Requirements
• B.Sc. in Chemical or Petroleum Processing Engineering.
• 5 years experience in process / operations.


Process Engineer
Minimum Requirements
• Bachelor of Chemical Engineer
• At least 10 years of experience in Oil & Gas industry with maximum 
experience in Refineries.
• Experience includes process development strategy, conceptual studies, 
plant & project economics and plant operation with sound knowledge of 
process simulation


Electrical Support Engineer
Minimum Requirements
• B.Sc. in Electrical Engineering,
• 5 years' experience in maintenance/installation and trouble shooting of a 
variety of large and complex electrical equipment in an oil/gas or 
petrochemical or power plants


Control Engineer
Minimum Requirements
• B.Sc. in Instrumentation or Electronics engineering.
• 5 years' experience in installation, maintenance and repair of electronic, 
pneumatic and microprocessor based instrumentation, process control 
systems and DCS systems.


Control Support Engineer
Minimum Requirements
• B.Sc. in Electrical Engineering,
• 5 years' experience in installation, maintenance and repair of electronic, 
pneumatic and microprocessor based instruments process control systems 
and DCS systems


Training Instructor-(Process)
Minimum Requirements
• B.Sc. in Chemical Engineering.
• 6 years work experience (subject to qualification as above) in Condition 
monitoring of heavy-duty rotating equipment, within oil/gas industry or 
power plants, at least 3 years of which should have been in a Training 
function (On-job) in his Discipline.
• Experience in preparing Training materials and familiarity with 
Competency Based Programs is required.


Training Instructor-(Mechanical)
Minimum Requirements
• B.Sc. in Mechanical Engineering.
• 6 years work experience (subject to qualification as above) in Condition 
monitoring of heavy-duty rotating equipment, within oil/gas industry or 
power plants, at least 3 years of which should have been in a Training 
function (On-job) in his Discipline.
• Experience in preparing Training materials and familiarity with 
Competency Based Programs is required.


Training Instructor-(Electrical)
Minimum Requirements
• B.Sc. in Mechanical Engineering.
• 6 years work experience (subject to qualification as above) in Condition 
monitoring of heavy-duty rotating equipment, within oil/gas industry or 
power plants, at least 3 years of which should have been in a Training 
function (On-job) in his Discipline.
• Experience in preparing Training materials and familiarity with 
Competency Based Programs is required.


Shift Controller
Minimum Requirements:
• B.Sc. in Chemical, Mechanical Engineering or equivalent.
• 7 years experience in operational aspects of various plants of which 
3 years should have been in a supervisory position.


Shift Supervisor- Oil Movement
Minimum Requirements
• Completion of Technical Secondary (12 years) education followed by 
2 years full time training leading to a Diploma in a technical trade.
• 8 years experience in various plant operations aspects, preferably in 
an oil/gas or petrochemical industry.


Shift Supervisor- RFCC
Salary in Dhs. 18430/- to 22534/- (including allowance)
Minimum Requirements
• Completion of Technical Secondary (12 years) education followed by 
2 years full time training leading to a Diploma in a technical trade.
• 8 years experience in various plant operations aspects, preferably 
in an oil/gas or petrochemical industry.


Shift Supervisor- CDU
Minimum Requirements
• Completion of Technical Secondary (12 years) education followed by 
2 years full time training leading to a Diploma in a technical trade.
• 8 years experience in various plant operations aspects, preferably 
in an oil/gas or petrochemical industry.


Shift Supervisor- Base Oil
Minimum Requirements
• Completion of Technical Secondary (12 years) education followed by 
2 years full time training leading to a Diploma in a technical trade.
• 8 years experience in various plant operations aspects, preferably in 
an oil/gas or petrochemical industry.


Shift Supervisor- Delayed Coker
Minimum Requirements
• Completion of Technical Secondary (12 years) education followed by 
2 years full time training leading to a Diploma in a technical trade.
• 8 years experience in various plant operations aspects, preferably in 
an oil/gas or petrochemical industry.


Shift Supervisor- Utilities
Salary in Dhs. 18430/- to 22534/- (including allowance)
Minimum Requirements
• Completion of Technical Secondary (12 years) education followed by 
2 years full time training leading to a Diploma in a technical trade.
• 8 years experience in various plant operations aspects, preferably in 
an oil/gas or petrochemical industry.


Systems Analyst- RIS
Minimum Requirements
1. Bachelors Degree / B.Sc. in an Engineering discipline, Computer Sciences 
or equivalent.
2. Masters Degree in Engineering discipline or equivalent is an added 
advantage.
3. Minimum 5 years of experience in Refinery Applications such as 
Lab Information Management System, Inspection management system, 
Simulation Package, Maintenance Management System, Process Industry 
Modeling System (PIMS), PI Real time database and Mass Balancing Packages.
4. Experience in Production scheduling, planning and yield accounting
5. Knowledge and Administering Microsoft SQL and Oracle
6. Sufficient skills in Structured System Analysis, System Design and Data 
Modeling.
7. Experience in Planning & Scheduling system in the Oil Refinery with 
IT Automation background.
8. Very good knowledge and command of English language.
9. Good skill in communication and presentation


Safety & Environment Officer
Minimum Requirements
- Completion of Technical Secondary School (12 years) education or school
education (10 years) + 1 or 2 years Technical Course.
- 3 years experience of which at least 1 year in the similar position in a 
petrochemical or chemical industry.
- Diploma in Industrial Safety or equivalent (NEBOSH). Safety & Hygiene etc.


Production Accounts Assistant
Minimum Requirements
• Higher Diploma in Chemical Engineering Technology (3 years) or equivalent.
• 5 years experience in production accounting in a similar industry.
• Proficiency in standard spreadsheet and database management applications


Sr Operator- Utilities
Minimum Requirements
• Completion of Technical Secondary (12 years) education followed by 
2 years full time training leading to a Diploma in a technical trade.
• 5 - 6 years experience in plant operations in an oil/gas or petrochemical 
industry.
• Candidates should have experience in Utilities


Sr Operator- Oil Movement
Minimum Requirements
• Completion of Technical Secondary (12 years) education followed by 
2 years full time training leading to a Diploma in a technical trade.
• 5 - 6 years experience in plant operations in an oil/gas or petrochemical 
industry.
• Previous Oil Movement experience is a must


Sr Operator- RFCC
Minimum Requirements
• Completion of Technical Secondary (12 years) education followed by 
2 years full time training leading to a Diploma in a technical trade.
• 5 - 6 years experience in plant operations in an oil/gas or petrochemical 
industry.
• Candidate should have experience working on RFCCU


Sr Operator- CDU
Minimum Requirements
• Completion of Technical Secondary (12 years) education followed by 
2 years full time training leading to a Diploma in a technical trade.
• 5 - 6 years experience in plant operations in an oil/gas or petrochemical
 industry.
• Candidate should have experience working on CDU


Sr Operator- Olefins & Alkylates
Minimum Requirements
• Completion of Technical Secondary (12 years) education followed by 
2 years full time training leading to a Diploma in a technical trade.
• 5 - 6 years experience in plant operations in an oil/gas or petrochemical 
industry.
• Previous experience working on Olefins & Alkylates is a must


Sr Operator- Base Oil
Minimum Requirements
• Completion of Technical Secondary (12 years) education followed by 
2 years full time training leading to a Diploma in a technical trade.
• 5 - 6 years experience in plant operations in an oil/gas or petrochemical 
industry.


Sr Operator
Minimum Requirements
• Completion of Technical Secondary (12 years) education followed by 
2 years full time training leading to a Diploma in a technical trade.
• 5 - 6 years experience in plant operations in an oil/gas or petrochemical 
industry


Operator- Jetty
Minimum Requirements
• Completion of Technical Secondary (12 years) education.
• 5 Years experience in plant operations in an oil, gas or petrochemical 
industry.
• Fair knowledge in DCS & PLC applications.


Operator- GUP Power
Minimum Requirements
• Completion of Technical Secondary (12 years) education.
• 5 Years experience in plant operations in an oil, gas or petrochemical
 industry.
• Fair knowledge in DCS & PLC applications.

Operator- RFCCU
Minimum Requirements
• Completion of Technical Secondary (12 years) education.
• 5 Years experience in plant operations in an oil, gas or petrochemical 
industry.
• Fair knowledge in DCS & PLC applications
• Candidate should have experience working on RFCCU


4 Comments
Comments

4 tukang comment:

Anonymous said...

xde utk fresh graduate ke??

.::: Princess MOMOY :::. said...

Kalau fresh momoy suggest cuba onshore dulu
then baru apply offshore

Norazizah Bt Mohammad Ramli said...

Salam momoy..kekosongan kerja masih ada ke..suami akak nak cuba mohon..

feeling groovy said...

Assalam..sekarang ni ada lagi tak kekosongan dari sahabat anda tu untuk company di Abu Dhabi?

Related Posts Plugin for WordPress, Blogger...

Please don't forget to share this to your Friends!